Memory roadmaps usually arrive with plenty of confidence and very few dates. This one has a date and a caveat, which makes it worth more than the average slide. Samsung is deep in equipment discussions with several manufacturing partners over 1d DRAM, and ZDNet Korea reports the target for getting that tooling into the fabs is as early as the second quarter of 2027.
Start with the name, because it invites a misreading. The d in 1d is not a measurement, and there is no one-nanometre anything involved here. These are generation labels inside what the industry calls the 10-nanometre class, where 1c is the sixth generation and 1d the seventh. Say DRAM as dee-ram and you will sound like you have been inside a fab.
The shrink is smaller than the branding implies. ZDNet Korea puts 1c circuit line width at roughly 11 to 12 nanometres and 1d at roughly 10 to 11. That is about a nanometre. It sounds like a rounding error until you remember what it buys, because narrower lines mean better performance and lower power draw, and in a data centre the power bill is the one that never stops arriving.
What makes this news rather than a roadmap is the tooling. Some forecasters had Samsung starting 1d production this year, and ZDNet Korea reports that view is now considered unrealistic within the industry, because the key machines are still in development. An industry official tells the outlet that Samsung and its partners are pushing research and development on yield and performance stabilisation, and that the timetable could still move by a quarter.
Push the equipment out to the second quarter of 2027 and the arithmetic gets tight. Allowing for the work it takes to qualify a line, ZDNet Korea's own analysis puts the earliest realistic start of initial mass production at around the end of 2027. A second industry official expects the plan to be firmed up around the end of 2026.
The payoff is stacked, and that is not a figure of speech. High bandwidth memory, pronounced letter by letter as H-B-M, is built by stacking DRAM dies on top of one another beside the processor so data has less distance to cover. Picture an apartment block rather than a subdivision. Samsung's 1c memory goes into HBM4 today, and industry sources cited by ZDNet Korea expect 1d to be adopted as the core die of HBM5E, the ninth generation, whose commercialisation is expected in 2029.
None of this is a Samsung announcement. It is a report about equipment schedules and internal targets, described by officials who spoke without their names attached, and equipment schedules are the layer where memory roadmaps tend to slip first. Should the tooling arrive on time, 1d would land with room to spare for HBM5E. Should it not, 2029 has a way of absorbing a late quarter or two.





Leave a Reply